Legion of the Damned #1: Rogue Trader-Era

I thought I’d share some more of my older paintjobs today and over the next while – only now “updated” in the past few weeks with new 32mm bases. Specifically, three of my old Rogue Trader Space Marine models painted as Legion of the Damned. As can be seen, these models are from the days before everything was covered in sculpted details, and ironically, before 90% of those details were skulls. Hence, all of the flames and skulls on this trip are entirely freehand. Oh, and I know that their flames “should” be yellow at the base and red at the ends, but on my models it depicts paint on armour, not actual flames (as sometimes retconned in Black Library). I don’t care what was written in an eBook or short story in 2015 or 2016, my guys have a direct lineage to White Dwarf 99.

Legion of the Damned, Rogue Trader, Oldhammer

The first model, on our left has 1987 on his tab, as well as “Medic”. It’s based off of “Brother Harris” from WD 99 in March ’88. The range in this particular advert are listed as having been sculpted by Michael and Alan Perry. Amusingly, Brother Harris in this particular advert is painted as a Legionnaire of the Damned, but I declined to do so myself as he had his helmet off. This model obviously predates the Medics that came later, as it completely lacks any medic gear or even an embossed caduceus on his pauldron, though interestingly there was a designated medic model (via sculpt, as opposed to the ones defined by paint that everyone just copied) from the very early RT01 Imperial Space Marines batch of sculpts.

Legion of the Damned, Rogue Trader, Oldhammer

The central model of this trio is one of the initial range of Space Marine Chaplains, circa 1988/89. Three of the initial six Chaplains had what we know as the Crozius Arcanum, though the other three did not. One having a Bolter and (crazily thin) Power Sword, one with a Bolt Pistol and Chainsword, and this fellow, with what I presume was/is an early combi-weapon. Note the “gatling”-style barrels behind the “regular” bolter detail. His armament, early skull-helm and especially his nifty shoulderpads got this guy drafted into my Legion of the Damned, where he has served as the squad’s sergeant for many years.

Legion of the Damned, Rogue Trader, Oldhammer

Finally, the model on our right. He is listed as Brother A Skull in the advertisement for the RT01 range of Marines from White Dwarf 98 in September ’87, back when they still gave models interesting names. I chose him to be a LotD figure because of his unique, skull-like helmet. Years after painting these guys, I came across the sculpted LotD backpacks from the Second Edition squad box, and so pried off several of the original backpacks that some of my LotD had, replacing them with the skull-sculpted versions.

Aside from the backpacks, Brother A Skull and the Chaplain’s old-school helms, and obviously the Chaplain’s sculpted shoulders, the rest of the skull, flame and bone detail on these guys is all freehand. Even today I’m particularly proud of the pauldron-skulls and the skull-helm that you can see here. And yes, I know that the colours in actual flame work the other way, but here it’s based on contrast and rule of cool. Some of the more recent writers and artists have taken things like the flame iconography way too literally.

Rogue Trader Black Templars Terminators Pt.2 (RTB09, 1989)

Black Templars Terminators, Oldhammer, Rogue Trader, RTB09

As I mentioned yesterday, when these models were fished out of a figure case they were all mounted on 25mm rounds. Since 40mm bases are now standard for Terminators, this presented a bit of a quandary, given how much smaller these original Indomitus Pattern models are to the current range after nearly 30 years of scale creep. I took inspiration from my RTB01 model that I painted as a Mega-City Judge and rebased onto a 32mm, and, well, he looks good – so I decided to just go for it. I also thought that if I added some slate, then it would help to “fill” the bases as opposed to if I left them plain. I think they worked out quite nicely in the end.

Black Templars Terminators, Oldhammer, Rogue Trader, RTB09

When it came to the modelling options, I wanted to keep them really unadorned, as befits the original models – so only original parts used here. I’ve got plenty of BT terminator bits and BT bling I can glue to models, but that can go on a subsequent squad. In keeping with the whole “old school” thing, I originally planned to keep the paint scheme pretty much only to black and white. No red outside of eye lenses and such. In the end I decided to do a bit more to the models. This was based on wanting to do something small with the Sergeant’s shield along with recognition of the fact that Black Templar Terminators are “Sword Brethren”, and as with other chapters’ terminators, they’re veteran elites with a penchant for personal heraldry, and such individuality is even more of a thing in Templars forces.

Black Templars Terminators, Oldhammer, Rogue Trader, RTB09

Because of this, I decided to allow myself to use a limited amount of red in each marine’s chapter iconography, and also that each marine’s shoulder pad would be different. I used a mix of freehand and decals, some of which turned out to be messed up, necessitating extra time to fix them -which I could have done without.

Black Templars Terminators, Oldhammer, Rogue Trader, RTB09

I chose a metallic for the Crux Terminatus on these, rather than the usual bone I’ve used in the past in single Terminators. Both to differentiate the Templars further from my other models, and to give them more of their own distinct look with a kind of polished iron. Again, the Sergeant was allowed a little more colour, with a touch of brass/gold and some gemstone paints for ruby inlay to his sword and sergeant’s icon.

So here we are. Seven editions and almost 30 years on and I’ve finally completed my first Terminator Squad. Let’s hope I can improve on that workrate or I’ll be dead before I get my next squad done. At least these guys are still 100% legal in 8th!

Rogue Trader Black Templars Terminators Pt.1 (RTB09, 1989)

Black Templars Terminators, Oldhammer, Rogue Trader, RTB09

A little over 10 or so years ago, I’d returned to full-time study, with all of the financial awesome that comes with. I wanted more models, so I decided to sell off some old stuff I wasn’t using to finance it. I attempted to sell off a box of Chaos Terminators and a set of Original RT Terminators, but no-one was interested in these old models (this was in the days before “Oldhammer” was cool!) Right, I thought. If no-one is interested in them unpainted, maybe they’ll be interested if I paint them. Since we were in the era of 3rd/4th edition 40k and new rules, I decided that Black Templars would be a good choice, since black would be easy to paint, and they were riding a wave of popularity, being relatively new and shiny. So yeah. I got one figure almost finished, lost one, started on a replacement, and into the figure case they went for a decade, forgotten.

Black Templars Terminators, Oldhammer, Rogue Trader, RTB09

A couple of months ago, with the rumours of 40k 8th Edition starting to flow and right after painting some Minotaurs or Iron Warriors, I decided to have a look through some of my old figure cases to see what was in there in terms of Power Armour. I figured it was better to try and finish some older stuff before moving onto starting new squads for the Minos or IWs. Besides, it’d give me something different to paint. One of the things I found was the squad of (now 6) Black Templars. Missing a couple of arms, and based on 25mm rounds, but there they were. All but one needed a lot of work, and the one that didn’t needed a decent amount anyway.

Black Templars Terminators, Oldhammer, Rogue Trader, RTB09

So I decided to finish them, and did. I ordered some various cross transfers from Ginfritter’s Gnomish Workshop/Armorcast that I used on some of the models (review to come shortly). while keeping some freehand on them. I’ll post up the other half of the squad (need to check the new rules) tomorrow, along with some discussion on my (limited) colour choices.

 

Minotaurs Space Marines – VI Squad

Minotaurs Space Marines - VI Squad

Minotaurs Space Marines – VI Squad

I finally completed the last of these guys a few weeks ago now. As is usual, they (almost) all got started together and then kinda got split into pairs and trios to get through the detailing stage. I enjoy painting marines more as individuals, and it becomes less of a grind, so it works for me.

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Vanguard, Puppetswar Temistokles

Minotaurs Space Marines Veteran Sergeant and Plasma Gunner

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Vanguard, Puppetswar Temistokles

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Vanguard, Puppetswar Temistokles

The sergeant is a bit of a bits-delve. New tactical legs, a 2nd edition powerfist, Anvil IndustryVanguard” (not-Mk8) chest and cape and topped with a Puppetswar “Temistokles” head. I had to carve off the lower part of the PW helmet to allow it to fit into behind the gorget. The pteruges on both figures come from Anvil again, and the plasma gun came from my stockpile of FW bits. I went RT-old-school with the Plasma Gun paint since it fit in perfectly with the Minotaurs’ weapon casings – red with copper coils. I considered doing something more fancy with his cloak, but he’s just a sergeant and pure red works for Spartans. I’ll get jiggy with someone else’s cloaks down the road, I’m sure.

I haven’t included a link to Puppetswar because despite their designs being utterly fantastic, their service and casting was atrocious. Probably the worst consumer experience I’ve had from an online retailer. Certainly the worst in years. here’s the gallery of my order, and here’s the saga, more or less as it happened. Here’s a post from another bloke that was made after I ordered mine, but before mine had arrived – so you know, it’s not just me. While I’d like to pick up more of their items and see if they’ve improved, I’m just not willing to send more money their way after all of that.

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Vanguard, Puppetswar Temistokles

Minotaurs Heavy Bolter Gunner and Corporal

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Spartan Head

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Spartan Head

Something interesting about this squad is that with the exception of the Sergeant, they are all recycled marines – all of the torsos and legs came from Nerdfest09 over on Dakka, when I purchased the scraps of his Blood Angels/Flesh Eaters force a few months ago. The heavy bolter guy was actually complete and painted by Nerdy and sent as a gift, so he had more of a touch-up to match the rest of the squad (and a FW resin shoulder added along with a new “Spartan” head replacing the bare head that will in turn go on a Carachodon or Flesh Tearer in the future).

The others were in various states, and so most have new heads and all have new arms, as they tended to be more CCW-geared – though a few were headless and many were ‘armless anyway. I bought a couple of sets of Minotaurs pads off FW several years ago, and between the sets there were a few miscasts. FW were kind enough to replace them (their CS is pretty damn good) and so given the theme of this squad, I used a few of those pads here as well. Hopefully they don’t stand out unless you’re really looking for them! The second marine here is the “Corporal” who will be the second combat squad leader. He was chosen because of the small tabard and MK8 torso.

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Spartan Head

Minotaurs Space Marines

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Spartan Head

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Spartan Head

These three are just standard tactical Space Marine troopers. I tried to match up the shoulder pad types on these guys. Another Anvil Spartan head makes an appearance here as well.

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Spartan Head

Minotaurs Space Marines

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Spartan Head

Minotaurs Space Marines, Forge World Minotaurs Shoulder Pad, Anvil Industry Spartan Head

Finally the last three of the squad, including another Spartan head and one marine that had been given some “battle damage” to one of his armoured greaves. The BA arm and bolter came out fine when painted in a non-BA style, and really I’m very happy with how these guys came out – especially as they’re almost all “recycled” marines given new life. As these guys were completed in September, they count as an “additional unit” for my Tale of Gamers painting challenge. I need to try and get something finished this month for the challenge, but it’s going to be bloody hard to do so…

Next up for the Minotaurs will be a Librarian, Captain (or other officer type) and a Dreadnought. I’m waiting on a Devastators box to steal an open right hand for the Captain, and I need to get some very thin plasticard for the Dread, so both of those have stalled out. Once I get back into painting then, I think the Librarian will be next up…

Minotaurs Space Marines – V Squad

I’ve gone and (finally) completed the last four models for my first squad of Minotaurs Space Marines. Their designation is V squad since I needed a squad number that would fit in their teeny little sculpted tactical marks, and I have almost entirely 40k 2nd Edition decals – at least easily accessible. I plan to have I squad as blinged out, II squad as somewhat less blinged, but still a little bit fancy pants. III wouldn’t fit, and the old-school solution to IV and VI squads seems to be “make your own by combining the V and the I”.

AOBR Tactical Marine, Minotaurs Space Marines

Three more models from Assault on Black Reach (2008), and a Missile Launcher marine from the Second Edition Boxed set (1993).

2e Space Marine Missile Launcher, AOBR Tactical Marine, Minotaurs Space Marines

And yes. I’ve had that guy sitting around in various boxes ever since I bought the starter set right after release back in ’93.

Citadel Space Marine Veteran Captain Flamer Marine Missile Launcher, Rogue Trader 40k2e Oldhammer AOBR Tactical Marine, Minotaurs Space Marines

Looking at this squad, made of 2e and 5e models, it’s amazing how little that the Space Marines have changed since their “update” from the initial run of Rogue Trader “Oldhammer” Beakies to the current form in the early 1990s. A little more bulk, and a little more bling, but very much the same series of models. And I’ve finally got a bunch of these starter models painted! Now working on the next squad, – VI – using some recovered secondhand marines as the base models and some resin pads including a few miscast ones. Sure, FW replaced them, but it would be wasteful to not use them anyway in some form, right?

Minotaurs Space Marines – Late RT-40k2e Captain and Flamer

I finally made myself finish off a couple more of the Minotaurs I’ve been (not) working on in the past couple of months. Both models are most commonly identified with 40k Second Edition, but actually date to the late stages of Rogue Trader. The Captain “Veteran Captain” is listed in the 1991 catalogue, and the flamer marine to 1993, right around the launch period of 2nd Edition. For a long time, I did my best to purchase and collect every space marine figure, so that means I’ve had this captain for 25 years. Good thing I’ve finally painted them, eh? Shame about all of the others I’ve yet to get to…

Citadel Space Marine Veteran Captain Flamer Marine Rogue Trader 40k2e Oldhammer

Both are painted more or less the same way that the test models were. I got a bit stuck on the colours for the Captain’s gemstones, as I want to avoid the use of too many colours on the Minotaurs and keep the overall palette quite Spartan (see what I did there?) Green will be a rare spot colour, with blue only a little more common. Where possible, I’ll be keeping the palette to bronze and red, with iron/steel/bone and a touch of yellow for specific markings.

Citadel Space Marine Veteran Captain Flamer Marine Rogue Trader 40k2e Oldhammer

I’ve used a couple of bits of Forge World’s Brass Etch on the Captain – the bull’s head chapter badges on his Shoulder and also the one on his Bolter.

Citadel Space Marine Veteran Captain Flamer Marine Rogue Trader 40k2e Oldhammer

One original backpack, and one modern one. I’ve used the modern pack on the flamer marine to help blur the lines between the older models and the more current ones, as they will all be mixed throughout the force – along with armour variant marks from FW and Calth, conversion bits from Anvil, maxmini and Puppetswar, and so on.

Citadel Space Marine Veteran Captain Flamer Marine Rogue Trader 40k2e Oldhammer

It’s a little hard to see in these photographs, but I’ve also used a metallic red as a final layer on the Captain model’s pauldrons as another point of differentiation between him and his men. Vallejo’s Turn Signal Red. I’ll also be using him as a Veteran Sergeant, rather than a Captain – mostly due to GW having produced SO many gorgeous captain models over the years, so the eventual commander of this force will be a little more fancy, and it also allows me to get use out of a nice captain figure that would otherwise have sat in an unpainted marines box forever.

Citadel Space Marine Veteran Captain Flamer Marine Rogue Trader 40k2e Oldhammer

As can be seen, I’ve based the pair of them on 32mm bases. They’re not exactly filling them out, but even these older marines overhung the 25mm rounds, and I do like the space it gives them.

Citadel Space Marine Veteran Captain Flamer Marine Rogue Trader 40k2e Oldhammer

When combined with the original test models, I actually have a combat squad worth of painted models. Hurrah! Now to finish off the final four tacticals for this group to make them a full squad.