Year’s End WIPs Part 4: Sugar Skull WIP

 

Remember the Sugar Skull I posted about a couple of weeks ago? Well, I didn’t get it finished on time. Luckily I’ve got a second chance to get it done by early January.

Here’s the progress so far:

Rollins’ Sun is a little wonky, but that section of skull is pretty rough and features the joins between the sections, amongst other things. Still, it fits the Mesoamerican feel pretty well. While the Sugar Skull stuff might (mostly) not be my usual type of content, It’s certainly always good fun freehanding designs.

 

 

Year’s End WIPs Part 2

A small update. At this point, work is crazytown with extra things that need to be done out of hours, and so aside from the odd bit of painting at work in 20-min lunchtime chunks, I’ve done bugger all on actual models. I’ve used what little time I’ve been able to paint in to work on the gift models, which I now have only 11 days left to get finished…

The 1:6 skull. I’m very happy indeed with how well the bone turned out. It’s going to feel odd indeed “defacing” it with the flowers and patterning of a Sugar Skull/Calavera. Probably because it’s so far out of my usual “comfort” zone. Usually something like the bone here would be a finished point. I need to get onto some of the decoration today.

Lil’ BUB also continues. I should be able to get a decent amount of her tabby banding done today. I want to clean up the torso and legs a bit more first…

No movement on Jinx – I’m still waiting on advice on the right kind of cleaning agent/surfactant to get the awful mould release off so I can get it painted. In a week. :/

 

 

 

Year’s End WIPs

I used to show WIP models a fair bit previously. I’ve done that a lot less in recent times, but now that I’m (almost) over the hardest part of the hump at work, and with three weeks left until I have my time off (though still tons to do at work!), it’s also the small window of time where I am able to work on a few other projects – in this case gifts for people at work. This year, I’ve got three – all of which need to be completed in the three weeks before I finish. No pressure, then.

Littlest Lil’ BUB WIP

Lil’ BUB, in the flesh.

The first is a Littlest Pet Shop toy repaint. I’m turning a generic LPS cat toy into “Lil BUB“. Mounted, masked and sprayed grey with Mr Surfacer – which actually sticks nicely to the soft PVC of the toy. I probably shouldn’t have masked the eyes since I’m going to have to try and match those distinct gigantic saucers on the actual cat. Oops. I’ll figure something out.

COO Model skull. Decapitated, mounted, sprayed.

COO Model Skeleton

Sugar Skull examples.

The second project is a Calavera – or Mexican “Sugar Skull”. This one is a Wedding present for a friend who really loves them. It took awhile to figure out how to create one of these. I decided to decapitate a 1:6 scale COO Model Skeleton who’d had a forearm breakage due to trying to post the overly-brittle plastic it is made of (yes, even after heating). It’s a nice feeling to be able to repurpose something that cost me that much into something besides wargame scenery – I was pretty POed when it broke and it’s just been sitting on a shelf getting glared at whenever I pass it by.

This one is more of a traditional modelling project, despite being made from a 1:6 Model. Neck is mounted on a 50mm rolled-edge base and that on top of a Secret Weapon Miniatures plinith. Not sure how I’ll decorate the plinith yet. It’ll depend very much on time available. I’d like to do something at the base of the neck as well – even a bit of greenstuff to blend it in with the base and give some additional stability. Again – I’ll have to work it out.

And this is where we’re up to…

The final part of this project is “Jinx” by Raging Heroes. I’ll write more about this one later, it was a gift from RH to it’s eventual recipient, but getting it so very late in the final wave of RH stuff has made things much more difficult than planned, especially as I’m going to have to buy some kind of chemical to remove the terrible mould release that Trollcast seem to use. TC’s equally-terrible choice of where to mount the channels for the additional parts is going to result in a loss of details and need for resculpting part of Jinx’ tail. If they’d added those exact same channels on the opposite side of the model it would not have interfered with Jinx’ tail at all. There’s also some pretty bed mould slip across the entire model, to the extent that if I find this on any of my other RH models when I finally get them all in hand and QA them, I’ll be asking for replacements. I’m not sure how or why RH allowed this poor level of quality through from Trollcast.

So with this in mind, and despite the kindness and good intentions from Mirielle, Jinx is going to be the bottom priority of these three. Hopefully I can still get it done.

Enterbay RM-4 (Not-)Jason Bourne. Part 2: Finished!

Well, it took a fair bit longer than I had hoped, but here’s the completed update of the completed RM-4 Jason Bourne figure from a few posts ago. The vinegar did it’s work (I hope). I rinsed it out and dried his clothes again. Found him a backpack and a gun, then I dressed my little mandollie, and sourced some fishing weights for his backpack, to give it a decent “hang”.

Enterbay Matt Damon as Jason Bourne. Flanked by my Michael Caine “Zulu” figure by DiD and Hot Toys Perseus.

A different angle. In the background is my kitbash of Joseph Fiennes’ character from Enemy at the Gates. More on that in another post.

A closer shot showing off the face.

An outdoor shot.

Another outdoor shot.

And my final shot, as the light faded…

I’m pretty happy with how this simple kitbash came out. I’m quite looking forward to using the other two of these RM-4 bodies to put together the two main outfits Matt Damon wore in Green Zone.

Enterbay RM-4 (Not-)Jason Bourne. Part 1

Rather than yet another post bitching about Kickstarters, I’ve decided to write about something else today.

I still haven’t had much of a chance to do any miniature painting or gaming, as I’ve got to fix up the awful lighting in my new hobby room and have been distracted by all kinds of other RL shit. So I’ve been playing World of Warcraft and Saints Row 3 to get some kind of fun in.

Today I decided to look through some of my boxes of 1/6 scale stuff and perhaps try and get a figure from that lot built or kitbashed. I had a box from j-p hobbies arrive yesterday with a bunch of parts for me to do a couple of kitbashes, so I started with that, though my Vladimir Putin has been hamstrung by my inability to tie a 1:6 tie with my big sausage fingers.

As an alternative, I decided to break out my Enterbay RM-4 nude, that just happens to have a Matt Damon likeness, and was offered with an outfit that kinda just happens to look a bit like (one of) Jason Bourne’s outfits.

It’s quite a good likeness, I think you’d agree – though not perfect. I actually bought three of this figure. One with the Bourne outfit, and two to bash into the two main outfits seen in Green Zone. (PMC and DCU). I’ll get to work on these later, though I spent some time and money tracking down the correct gear for them about 2 years ago.

Naturally, as I was taking the photos, immediately after taking him out of the packaging for the first time ever, something bad happened. His arm just fell off.

Good to see 1:6 quality, direct from the manufacturer is the same as it ever was. Since it’s been 2 years since I purchased this figure, I’m pretty much up a certain creek without the means to paddle myself elsewhere. Trying to glue the cracked peg in place will be a temporary solution at best, though I might try it with plastic cement. Luckily it does dry fit in place, and so if I manage to not play with my dolly and just leave him posed and in place it’ll be okay.

Checking out all the clothing and parts, I see that the black clothes are really likely to stain the figure, so I’ve had to give them a bath in white vinegar. Once they come out of it, I’ll leave them out to dry, and if I’m lucky, I can assemble Maniac Matt Bourne in the morning and update this post. I also noticed that he doesn’t come with a pistol or a handbag. I mean satchel. satchel. right. I’ll have to look through my bits boxes to find both. I’m 100% sure I’ve got appropriate ones for both. It’s just a matter of finding them in a room filled with boxes of 1:6. I’ll either give him a Beretta 92 or a SIG-Sauer P225. Whichever of those (or close to) I can find first.

Here’s a shot of everything that you get. The RM-4 comes with two fisted hands with quite decent paint, a neck peg if you’d like to use an alternate head on this body, moulded boots, a longsleeve tee, black pants and a black jacket that looks like a rough analog to the one from The Bourne Supremacy.

Over on OSW, there were a bunch of people modding the figure to take off the ankle extensions that Enterbay inexplicably added to this nude, but on balance I’m not going to push my luck, and my Jason Bourne can be slightly taller than he should be. BeastX shows why he has that name with an awesome height mod.

Being an Enterbay figure, for the price they were selling it, it was an absolute bargain – simply because it was unlicenced. Enterbay’s clothing is as always high quality.

Welp! About tine to take the clothes out of the vinegar and let them dry… Hopefully I’ll have an update tomorrow!

1:6 Kitbash – Hot Toys TACP meets MIL/Merit Spanky.

Here’s a kitbash I put together awhile back. I took photos but for some reason it appears that I never posted them up here… you can tell it’s well over a year ago since the Warcraft login screen lists WotLK. It’s also my old monitor..

I’d had the Hot Toys figure for awhile, and always liked it, so I decided that one of the most romantic ways my wife and I could spend a Saturday evening and night was to play some World of Warcraft and put together a mandollie.

I wanted to put together a USAF TACP using the Hot Toys kit, but I also wanted to update him a bit. Since that early Hot Toys “ACU” is probably better off used in some kind of sci-fi bash, or as a commercial camo, I got out a spare “Lucas” 10th Mtn with BBi’s nice ACU print.

The other option was to use Multicam with Crye-cut pants, so I picked out a parted-down MIL/Merit “Spanky” to scavenge his clothes if needed. I also wanted to save the Jake Gyllenhall-alike head sculpt for my eventual Jarhead “Swoff”  bash.

The first pic shows the stuff I got out to work with – a Hot Toys nude from the Secret Service ERT figure, a broken-down Merit/MIL ”Spanky” figure, and BBi “Lucas”.

Hot Toys TACP - Boxed

Next 2 pics are pretty much the “unboxing” images from the TACP – the first with his gear in the tray, and the second with all of his gear taken out. In the second you can see my referencing Orion0800’s kitbash on OSW in the background. Orion is an actual USAF TACP, and complimented me on my work (along with another TACP active on OSW) – so that gave me a little warm glow and continues to do so when I look at this figure.

Hot Toys TACP Tray picture

Hot Toys TACP Unboxed!

From here, it was simply a matter of putting all the gear into a pile, working out which to go with, and then playing dolly-dress-up.

Gear Pile!

I wanted to keep it pretty much the same, despite swapping out both the figure and the uniform. I used Spanky’s boots since I wanted to keep the high-sitting HT beets for future bashing (and a lot of those hiking type boots look quite plasticky anyway), and the kneepads were obviously not needed since I was using the Crye cut pants. In the end I did go for the Multicam, since it appears to be more current and just looks better. I ended up using more of Spanky than I’d originally planned, but that’s okay.

TACP Kitbash - front view

Another view

TACP Rear View

In the end the parts breakdown is:

Body: HT Truetype Secret Service ERT
Uniform, Hat, Sunglasses, gloves, boots: MIL “Spanky”
Dropdown: PH USMC RCT
Smoke Grenades: Soldier Story (I think)
Everything Else: HT USAF TACP

TACP Kitbash - last pic!

Maid to order.

After I started buying 1:6 figs again a few years ago (mostly men with guns) my wife showed some interest, so over the past couple of years I’ve bought her a variety of girls, or FemFigs as they’re usually called (rather than “Dolls”, though let’s face it..) Quite a lot of them have been film-related, though some are also military or police-based, and others are simply of interesting outfits. For some reason, PVC and corsets seems pretty popular with these figures, so there’s also a few of those.

Anyway, this is essentially “my wife’s update” since she’s not likely to start a blog or anything, but she’s keen to share her figures and photography. (no really.. my dolls have guns and swords!)
This is the BBi Goth Maid outfit swaped onto the BBi Hispanic female, both from a couple of years ago (no hat or Jewelry at this stage). Pretty simple stuff to start with, but then if it looks good, that shouldn’t matter. We got a break from the winter rain on the weekend so took some stuff out to photograph. The shots are her photography.

I wanted to take some pics of my own figures and some miniatures to put up as well, but the light started to really suffer, so we didn’t get the chance. Hopefully this weekend!