Bob Olley’s Rogue Trader-era Ogryn Sergeant

The figure I’m showcasing today was painted quite some time ago, and has only been rebased in recent times – so not quite enough work for me top count him as part of my finished figures for this year.

It’s Bob Olley’s Ogryn Sergeant, which to me is the truly Archetypical Ogryn. Not the first Ogryn model, mind you – that particular honour goes to Jes Goodwin’s effort of 1988. Regardless, and despite my own huge preference for Jes’ work over Bob’s, Bob’s Ogryn here remains the most defining figure of the range ever sculpted – and never bettered or even equalled in my opinion.

Oldhammer Ogryn Rogue Trader

Bob Olley’s Ogryn Sergeant

Oldhammer Ogryn Rogue Trader

Bob Olley’s Ogryn Sergeant

Oldhammer Ogryn Rogue Trader

Bob Olley’s Ogryn Sergeant

Oldhammer Ogryn Rogue Trader

Bob Olley’s Ogryn Sergeant

 

Oldhammer Ogryn Rogue Trader

Bob Olley’s Ogryn Sergeant

I originally painted this model back in early 1989, not long after it’s release. It got stripped down and repainted in the early noughties, this time with Auscam fatigue pants to match my Imperial Guard Regiment (who I need to update and photograph sometime as well) and a Māori-style arm tattoo, following my repeated travels to New Zealand.

I blame this figure for starting my long love affair with Citadel’s (and others’) Ogres. I just wish Bob’s later Ogryn efforts (for Citadel, and even for Maxmini) lived up to this figure’s quality, but alas – nothing yet. Perhaps we’ll get lucky one day and Bob will sculpt some more fantasy or Space Ogres to compliment his range of Scrunts (not-Squats)?

 

 

 

Oldhammer Trolls and another ID Request

This time we have another couple of figures started decades ago and finished a couple of years ago. A couple of the old-school Citadel (or Oldhammer) Trolls.

C20 Oldhammer Troll

C20 Cave Troll

The first guy is a C20 Cave Troll. I started painting him in the mid-1990s with the skin tones of a Stone Troll, for my WHFB Orc and Goblin army. Finally finished him 2 or 3 years ago, and stuck him on a slate base from back-to-base-ix

Oldhammer C20 Troll

C20 Warrior Troll

Also from the old C20 range, this guy is known as “Warrior Troll”. No D&D style misgivings about metal armour for him, no indeedy! Also started around the same time as his mate up there, and finished at more or less the same time, when I dug them out of half-painted purgatory and finally completed them.

Oldhammer C20 trolls

C20 Trolls. Two thirds of a unit!

Both of these guys were sculpted by Aly Morrison, who really did quite a good job on the Troll range of the day. I have to say I’ve also liked pretty much all of the subsequent renditions of trolls that GW has come out with over the years. The stone trolls, the LotR-inspired Trolls, the plastic Swamp Trolls… all good stuff. Well, except for the Chaos Trolls, I guess. But I don’t really consider them part of this range, which I’ve mostly thought of as a subset of the O&G one, with a side range of being really useful for tabletop RPGs. These guys will have a new lease of life at some stage when I finish painting their mate, and then convert my old O&G horde over to Kings of War. But working on 5 armies already at once means the Orcs and Gobboes will need to wait a little while.

C20 Oldhammer Trolls

C20 Trolls – the arseward shot!

Looking at them today, the golden yellow-blonde hair does look pretty garish, especially with the bright blue skin, but hell – that’s how I started them, and it’s not something I’m willing to mess up, change or repaint. I’m just happy to have them done. I’ve got their mate on my painting shelf as well. A mid-90’s stone troll who I selected to finish this unit off about three years ago when I finished these two. He’s been partially painted and sitting on my painting shelves ever since… funny how these things work, eh?

 

And finally, a request to those who read this blog. Inspired by the fast work in finding out the identity of Farendil, Elf ranger so quickly, I’m again asking for help in identifying this guy.

Oldhammer Wizard – seeking his name!

I’ve been looking through SoL a bit, and he’s not a C02 wizard. There’s no pic of the TL2 wizard on SoL, so that’s a possibility – it’s certainly from the right timeframe. He’s not from the DungeonQuest series, or any of the other board games of that time. He’s listed as #19 of the Wizards in the Blue 1988 catalogue, but that group is a mash-up of several previous ranges, and I’d like to find where he comes from originally, and if he had a name as well.

This is actually his second paintjob. I first painted him bright blue and red, with brown hair back in the 1990’s, then repainted him in the 2000’s in the darker blue scheme with grey hair. I don’t intend to repaint him again, just rebase him this time. I figure he looks the part to play the Necromancer that Marouda’s KoW Undead army needs for their next battle, so I’m rebasing him and might just add a tiny bit of edge highlighting.

 

Lucrezzia Belladonna and Farendil, Elf Ranger

Just a small update today. Last shown way back in June 2013, I ended up finishing these two some months ago. So I’m taking this opportunity to follow-up and show them off – something I haven’t been too good at with my various WIP figures to date. The Lady of the pair turned out not to be a Brettonian, but an Italian.. erm, Tilean. Lucrezzia Belladonna to be exact – sculpted by Chris Fitzpatrick’s for the WFB Dogs of War range, circa 5th Edition – so 1996+

lucrezia belladonna

Lucrezzia Belladonna and Farendil, Elf Ranger

Lucrezzia is basically a display piece, as she was painted for my wife. While I’m sure I could (and would) do something a bit more interesting with the model today, I’ve learned enough about repainting my old models to know when to go in with gusto for a repaint and when to leave well enough alone. I might just keep an eye out on eBay for a second one instead. She might have a small role as a Wizard or even a mounted Vampiress in a KoW force, she’ll mostly be inhabiting the shelf.

The Ranger definitely qualifies as Oldhammer, either late 2nd edition or early 3rd WHFB. I’m not sure of his origin or name (figures had names back then) I suspect that he’s either from one of the Scenario packs (though I couldn’t find him in this SOL page) or perhaps even a old-school Citadel-era Lord of the Rings model. I certainly remember seeing him in one of my early White Dwarves, circa issue 101-ish, and his paint scheme reflects that – a homage to my memory of the original picture back in my formative years. If anyone knows of his true origin, please let me know.

– Update! Eagle-eyed reader Dave Kay found him here. His name is Farendil, Elf Ranger. Even back in the day I would never picked him for an elf, especially with that nose and his great ham fists.

lucrezia belladonna

Lucrezzia and Farendil, Elf Ranger again.

I like to add the rear view. You so rarely see the sculpting or any images of the back of the figures we paint, and half of the sculpting and paint is there, after all.

lucrezia belladonna

Lucrezzia Belladonna solo.

Some of the Oldhammer and modern miniatures crowd alike seem to have their heads disappear up their arses a little bit, with the endless “it was all so much better back then” or “that looks so bad – like a 1990s figure” – and while the mid-90’s really did throw up some dogs in many ranges, and sub-par figures replacing older, better sculpts or figures that have been replaced more recently with better models – figures like Lucrezzia prove that lovely, characterful sculpts have been a feature of all eras.

If anyone out there happens to have a spare of Lucrezzia that they’re willing to part with for a reasonable amount, please feel free to contact me. I promise she’ll be well treated and painted. 🙂

Epicast “Ork” Desert Adobe Buildings

So here’s some more stuff I’ve had kicking around for the last decade and a half. Produced in a kind of foam resin (compressed polystyrene?) by Epicast – one of the contemporaries of Armorcast and non-GW Forge World USA back in the days of licenced Titans and Epic 40k stuff – before the founding of the GW-owned Forge World we now know. Anyway, as regular readers would know by now, I used to buy a lot of resin terrain back in the day, including a lot of stuff by Grendel – now known as Scotia Grendel. Amonst those purchases were three buildings, made in the 40k Ork style of the day – basically Adobe buildings. So I bought them, used them a few times and so forth, and then put them away. Since moving and setting up The War Room, my desert mat has gotten some use again, and I’ve found myself using these buildings again. They never got painted and never even made my painting radar since I never liked them all that much, and planned to Orkify them with various gubbins and all that sort of thing. Since I’ve actually used them recently, I took a good look at them and decided that they don’t need Orkifying after all, since I’d also like to be able to use them in Fantasy, Historical and Modern games as desert buildings, and if I glued scrap metal crap and spikes all over them I’d be literally painting them into a 40k-only corner.

I nicked this picture from a Google Search that found it on TMP, since I forgot to take an unpainted pic of my own ones.

The main problem if I’m being honest is that I never really liked them much at all. They’re rough as guts, and it wouldn’t be hard at all to build better ones out of form core – which is what you can pretty clearly see these ones were made from originally.

Epicast “Ork” Building #1

While I was painting them, I noticed some odd things about them. The L-shaped building has a 2nd-floor door that opens to nothing, and the little courtyard to it’s left has to entrance. Looking closer, I figured out that the original building had some supports and a balcony that led to that courtyard, and you can even see where the wall was roughly patched up, as well as the pole-hole. I also cut out one of the excessive buttresses from the middle of the main doors. At first I was going to rebuild all of those balconies, which caused a lapse of interest in the project for a week or so before I simply made myself just get the fucking things finished. I can make my own, better quality adobe buildings later on if I want balconies and other fancy sundries like that.

Rear view of Epicast “Ork” building #1.

I added the second door way that you can see above by cutting a hole out of the foam building and gluing in some icy pole (popsicle) sticks. It’s at least as good as the malformed castings that the model came with. And now figures have a way to get up there!

Epicast “Ork” building #2

This building in the above pic also has clearly had a balcony removed from the original – both with a door and visible holes where the support posts used to be. So clearly, these three models were someone’s own personal scenery that ended up being cast and sold. Which is where the gap in the wall was plugged, and possibly the over-used buttresses were added.

Rear view Epicast “Ork” building #2

In order to make these things look reasonable, they had a few layers of drybrushing, and then I broke out the airbrush to darken the lower parts of the building, along with the space between the buttresses.

Epicast “Ork” building #3

I also added some unsubtle weather streaking down the windows and from the roofing on the buildings using Tamiya Weathering Master kits – you know, the ones that look like eyeshadow make-up compacts. Also added grime to the doorway areas using the same stuff, some Kromlech weathering powder and some smearing with my fingers.

Epicast “Ork” building #3

This building comes without a base for some reason, but I added some grass tufts in a couple of different colours to the bases of the other two buildings. I have to say that the work I did on these was a success from my point of view. While they’re not outstanding, I think they actually came up well and now look pretty good, and the airbrushing, weathering products and grass tufts manage to make them look like they have a bit of detail on them. Any further details can come from leaving game-appropriate resin detail pieces around them – toolboxes, jerrycans, oil drums, hesco barriers – or wooden crates, wicker gabions and wooden barrels.

Dark Angels Dreadnought: Mortis-Specced

As seen awhile ago, one of the things I’ve dug out of the pits of half-finished hell was a Dark Angels Dreadnought – old-school heavy metal style, dating back from 2nd Edition 40k. Back in the day when the dreads were all-metal, the only way to get hold of the different weapon options was to buy the different chapter dreads or order them from GWUK (not the simple thing it is now with the Internet and online commerce). So some things have definitely changed far for the better since then.

2nd Edition 40k Dark Angels Dreadnought Box.

 

Anyway, as noted previously, the paint on the arms dates these arms back to 1997 (when I added the nWo logo) and then 1998 (when I went over it with the red of the Wolfpac). The original painting of this model would have been when 40k 3rd edition was released and the uber-combination of dual assault cannons on Dreadnoughts became a thing of the past. When I restarted painting this guy, I blinged out the model a little more with plastic bits from more modern Dark Angels plastic kits.

Mortis-Specced 2nd Edition Dark Angels Dreadnought

Back in the day there were no “left-handed” Assault Cannons and dreads were 100% metal models, so I cut up a right handed one (in metal) and a Missile Launcher left arm (probably the original one from the DE Dread kit) to make the above. With the Contemptor Mortis pattern Dreadnought being a thing that exists these days, I added a magnetised cyclone missile launcher battery to the top of the model with optional DA-Icon Bling for normal games. I’ve never been a fan of ginormous banner poles on things, so that’s something I didn’t bother with at all. Both arms are already magnetised, and so I may paint up and magnetise a normal Power Fist arm for an option at some point in the future.

Side shot of Dark Angels Dread. It’s turned out pretty well, I think.

I’ve costed the thing out with dual AC for very friendly local games, based on the costs for the various other arm weapons. Since the Rifleman Dread is also a thing these days, it’s not as offensive as it might have been a few years ago. But really, the main thing here is rule of cool since for the time being it’s mostly going to see action from the inside of my display cabinet till I get some more armies costed up and built. Not to mention finishing these Dark Angels.

Dark Angels Dread showing WCW/nWo fandom of the mid-late 90’s

Note the kill-markings from 2nd edition on the Assault Cannon arms – looks like each one racked up a Dread back in the day. I didn’t bother keeping track of infantry, and Tanks weren’t as ubiquitous in 40k as they are today.

With Cyclone Missile Launcher Swapped out

As can often be the case, I think the model looks far better in hand than these pics show. C’est la vie, I guess. Small details always show up like huge pimples and dimples when something is blown up this much. 😉

Dark Angels Dread rear view.

The experiment with salt weathering didn’t work out at all. However, the weathering powders on the feet and lower legs of the model did turn out quite nicely. Trying for a mid-ground between the pristine factory-fresh paintjobs that so many vehicles and walkers have the the more realistic and weathered painting that looks so good.

Well, that’s it for today. This guy was finished a month or more ago, but with midwinter here, decent days to take photos have been so few and far between the photos had to wait.